What does the 'FB' stand for in Morse M-Factor FB bandsaw blades?

'FB' stands for Foundry Band. While other carbide blades target continuous steel production, the M-Factor FB line is custom-formulated for casting environments, foundries, graphite manufacturers, and wood processing shops running tough, sand-embedded, or abrasive materials.

Why is the M-Factor FB series ideal for aluminum castings?

Raw castings feature thick gates, risers, and leftover molding sand that can instantly dull a bi-metal blade. The M-Factor FB uses specialized, wear-resistant submicron carbide tips and aggressive chip-clearing tooth geometry to slice through casting irregularities without binding, pinching, or losing edge sharpness.

Do Morse M-Factor FB carbide blades require a break-in period?

No. M.K. Morse incorporates a proprietary factory-honing process during manufacturing that pre-conditions the tooth edges. Because they are ready to run at full production feed rates immediately out of the box, running a traditional, slow break-in cycle can actually decrease total cutting efficiency and shorten blade life.

Can the M-Factor FB blade be used for cutting thick exotic hardwoods?

Yes. Furniture makers and high-volume wood processing operations use M-Factor FB blades for rough-cutting abrasive timbers, composite plywoods, and dense laminates. The combination of its 3 TPI (Teeth Per Inch) profile and deep gullets clears large chips efficiently, eliminating thermal wood burning during deep cuts.

M.K. Morse M-Factor FB Carbide-Tipped Bandsaw Blades

Shop by Category

M-FACTOR (FB) CARBIDE TIPPED

Prevent binding and accelerate production speeds in severe environments with custom-welded M.K. Morse M-Factor FB (Foundry Band) carbide-tipped bandsaw blades. Explicitly engineered to cut highly abrasive and non-ferrous materials, these loops match a submicron grade carbide tip with a high-performance backing steel to withstand extreme structural stresses. Deploy these triple-chip tooth geometry bands to quickly remove gates and risers on aluminum castings, process dense graphite components, or slice through abrasive woods, plywoods, and composites. Custom-cut to your exact machine specifications, Morse M-Factor FB loops deliver a smooth surface finish while providing an exceptionally long tool life in foundry and millwork settings.

Blade Features:

Designed for aluminum castings, composite materials, rough cutting of abrasive wood and plywood
Carbide tipped blades are designed to be extremely wear resistant
Specially formulated submicron grade of carbide and triple tooth geometry
Smooth finish for less secondary work.
Exceptionally long life, fast cutting

Applications:

Aluminum castings
Composites
Graphite
Abrasive wood
Non-ferrous
Brass
Bronze
Aluminum

Quick view Details

1/2" .025 3TPI M-FACTOR FB

MSRP:

Now: $176.27

Choose Options
Quick view Details

3/4" .035 3TPI M-FACTOR FB

MSRP:

Now: $185.95

Choose Options
Quick view Details

1" .035 M-FACTOR FB

MSRP:

Now: $185.95

Choose Options
Quick view Details

1 1/4" .042 3TPI M-FACTOR FB

MSRP:

Now: $190.27

Choose Options

Frequently Asked Questions

Q: What does the 'FB' stand for in Morse M-Factor FB bandsaw blades?
A: 'FB' stands for Foundry Band. While other carbide blades target continuous steel production, the M-Factor FB line is custom-formulated for casting environments, foundries, graphite manufacturers, and wood processing shops running tough, sand-embedded, or abrasive materials.
Q: Why is the M-Factor FB series ideal for aluminum castings?
A: Raw castings feature thick gates, risers, and leftover molding sand that can instantly dull a bi-metal blade. The M-Factor FB uses specialized, wear-resistant submicron carbide tips and aggressive chip-clearing tooth geometry to slice through casting irregularities without binding, pinching, or losing edge sharpness.
Q: Do Morse M-Factor FB carbide blades require a break-in period?
A: No. M.K. Morse incorporates a proprietary factory-honing process during manufacturing that pre-conditions the tooth edges. Because they are ready to run at full production feed rates immediately out of the box, running a traditional, slow break-in cycle can actually decrease total cutting efficiency and shorten blade life.
Q: Can the M-Factor FB blade be used for cutting thick exotic hardwoods?
A: Yes. Furniture makers and high-volume wood processing operations use M-Factor FB blades for rough-cutting abrasive timbers, composite plywoods, and dense laminates. The combination of its 3 TPI (Teeth Per Inch) profile and deep gullets clears large chips efficiently, eliminating thermal wood burning during deep cuts.

Shop by Category

Shop by Brand

Shop by Brand

1/2" .025 3TPI M-FACTOR FB

3/4" .035 3TPI M-FACTOR FB

1" .035 M-FACTOR FB

1 1/4" .042 3TPI M-FACTOR FB