What makes standard bi-metal port-a-band blades better than carbon steel blades?

Standard bi-metal port-a-band blades combine a high-speed steel cutting edge with a flexible alloy steel backing. This allows the teeth to stay sharp significantly longer under intense friction heat while preventing the blade from snapping when twisted or forced during handheld operation.

What types of materials are these portable bandsaw blades designed to cut?

These loops are optimized for common on-site and electrical installation materials. They easily slice through conduit, copper pipe, structural tubing, angle iron, threaded rod, and mild steel solid stock.

How do I choose the correct tooth pitch (TPI) for my portable bandsaw?

Choose your TPI based on the thickness of the material wall. Use a finer pitch like 18 TPI or 24 TPI for thin-walled conduit and sheet metal to prevent tooth strippage. Switch to a coarser pitch like 10/14 TPI or a straight 14 TPI for thicker solids and heavy-walled pipe.

Why does my port-a-band blade keep jumping or slipping off the wheels?

Blade slipping or jumping usually points to improper blade tension, worn rubber tracking tires on your saw's wheels, or a build-up of metal chips inside the guard. Clean out the blade housing and inspect the rubber tires for deep grooves or wear.

M.K. Morse Standard Bi-Metal Port-A-Band Blades

Shop by Category

Standard-Bi-Metal Port-A-Bands

Optimize your on-site fabrication and installation tasks with professional-grade M.K. Morse Standard Bi-Metal Port-A-Band blades. Engineered with premium Matrix II high-speed steel cutting edges electron-beam welded to a resilient alloy backing, these handheld loops are built to withstand heavy impacts without shattering. Featuring a straight tooth pitch design for maximized chip clearance, they provide rapid, uniform cuts through machinable metals like stainless steel, conduit, copper pipes, structural tubing, angle iron, and solids. Available in standard commercial lengths (including 44-7/8", 35-3/8", and 27-3/16") to fit all major handheld portable bandsaws, these loops combine exceptional thermal stability with peak tooth-strippage protection to minimize tool changes in the field.

Features & Benefits (Bi-Metal Blades)

Shock resistant teeth great for cutting machinable metals
Special heavy duty skus available in .025" thickness
Straight pitch teeth for better chip clearance and fast cutting
Available in a variety of lengths for any portable saw on the market

Use on machinable metals:

Stainless steel
Pipe
Tubing
Solids

Quick view Details

Standard Bi-Metal 27 3/16" Port-A-Band (Box of 3)

MSRP:

Now: $24.60

Choose Options
Quick view Details

Standard Bi-Metal 27 3/16" Port-A-Band (Box of 25)

MSRP:

Now: $180.22

Choose Options
Quick view Details

Standard Bi-Metal 27 3/16" Port-A-Band (Box of 100)

MSRP:

Now: $713.22

Choose Options
Quick view Details

Standard Bi-Metal 28 13/16" Port-A-Band (Box of 3)

MSRP:

Now: $25.63

Choose Options
Quick view Details

Standard Bi-Metal 28 13/16" Port-A-Band (Box of 25)

MSRP:

Now: $190.80

Choose Options
Quick view Details

Standard Bi-Metal 28 13/16" Port-A-Band (Box of100)

MSRP:

Now: $759.22

Choose Options
Quick view Details

Standard Bi-Metal 35 3/8" Port-A-Band (Box of 3)

MSRP:

Now: $25.63

Choose Options
Quick view Details

Standard Bi-Metal 35 3/8" Port-A-Band (Box of 25)

MSRP:

Now: $216.44

Choose Options
Quick view Details

Standard Bi-Metal 35 3/8" Port-A-Band (Box of 100)

MSRP:

Now: $698.99

Choose Options
Quick view Details

Standard Bi-Metal Port-A-Band (Box of 3)

MSRP:

Now: $24.06

Choose Options
Quick view Details

Standard Bi-Metal Port-A-Band (Box of 25)

MSRP:

Now: $180.22

Choose Options
Quick view Details

Standard Bi-Metal Port-A-Band (Box of 100)

MSRP:

Now: $713.22

Choose Options

Frequently Asked Questions

Q: What makes standard bi-metal port-a-band blades better than carbon steel blades?
A: Standard bi-metal port-a-band blades combine a high-speed steel cutting edge with a flexible alloy steel backing. This allows the teeth to stay sharp significantly longer under intense friction heat while preventing the blade from snapping when twisted or forced during handheld operation.
Q: What types of materials are these portable bandsaw blades designed to cut?
A: These loops are optimized for common on-site and electrical installation materials. They easily slice through conduit, copper pipe, structural tubing, angle iron, threaded rod, and mild steel solid stock.
Q: How do I choose the correct tooth pitch (TPI) for my portable bandsaw?
A: Choose your TPI based on the thickness of the material wall. Use a finer pitch like 18 TPI or 24 TPI for thin-walled conduit and sheet metal to prevent tooth strippage. Switch to a coarser pitch like 10/14 TPI or a straight 14 TPI for thicker solids and heavy-walled pipe.
Q: Why does my port-a-band blade keep jumping or slipping off the wheels?
A: Blade slipping or jumping usually points to improper blade tension, worn rubber tracking tires on your saw's wheels, or a build-up of metal chips inside the guard. Clean out the blade housing and inspect the rubber tires for deep grooves or wear.

Shop by Category

Shop by Brand

Shop by Brand

Standard Bi-Metal 27 3/16" Port-A-Band (Box of 3)

Standard Bi-Metal 27 3/16" Port-A-Band (Box of 25)

Standard Bi-Metal 27 3/16" Port-A-Band (Box of 100)

Standard Bi-Metal 28 13/16" Port-A-Band (Box of 3)

Standard Bi-Metal 28 13/16" Port-A-Band (Box of 25)

Standard Bi-Metal 28 13/16" Port-A-Band (Box of100)

Standard Bi-Metal 35 3/8" Port-A-Band (Box of 3)

Standard Bi-Metal 35 3/8" Port-A-Band (Box of 25)

Standard Bi-Metal 35 3/8" Port-A-Band (Box of 100)

Standard Bi-Metal Port-A-Band (Box of 3)

Standard Bi-Metal Port-A-Band (Box of 25)

Standard Bi-Metal Port-A-Band (Box of 100)